0.75HP - 1HP Replacement Impeller for Pentair WhisperFlo | PC&G 073127 PCG073127

The PC&G Impeller for Pentair WhisperFlo 0.75HP - 1HP is a factory-spec replacement matching part number 073127, providing a reliable path to reviving your pump's original hydraulic performance. Designed with vane geometry that promotes strong water movement while keeping power consumption low, this impeller is manufactured from chemically stable, impact-tough material that stands up to years of continuous duty. It drops directly into Pentair WhisperFlo...

1.5HP Replacement Impeller for Pentair SuperMax & SuperFlo Pumps | CMP 355074 | SW-21-303 | 25305-074-000

The CMP Impeller 25305-074-000 delivers reliable water-moving power for 1.5 horsepower pool pumps, offering proven compatibility with Pentair SuperFlo and Sta-Rite SuperMax equipment. Engineered for strong, steady water circulation, this impeller keeps your pool's filtration loop operating at full capacity. Before installing, we recommend verifying your pump model against the compatibility list or reaching out to a qualified pool technician to confirm a proper match....

1.5HP Replacement Impeller for Pentair WhisperFlo Pumps | PC&G 073129 PCG073129

The PC&G 1.5HP Impeller, model PCG073129, serves as a precision-matched substitute for the factory Pentair 073129 component in WhisperFlo pool pumps. This impeller is engineered to sustain strong water throughput and maintain peak pump hydraulics, ensuring your filtration system circulates water at the volume it was designed for. Manufactured from heavy-duty, wear-resistant material, it delivers dependable service across years of continuous use. Replacing a worn...

1/4" Air Bleeder Screen Cap for Clean & Clear Plus, EasyClean & Quad D.E. Filters | Pentair 190106Z

Restore reliable air venting with the Pentair Air Bleeder Screen Cap Replacement (190106Z), a 1/4" component made to fit Clean & Clear Plus, EasyClean, and Quad D.E Filters. This small but vital cap allows accumulated air to exit the filter housing in a controlled manner, preventing pressure buildup that can reduce filtration effectiveness. Constructed from resilient materials that hold up to constant chemical and water...

154687 Air Relief Bleeder Assembly for PacFab Triton II Sand Filter | Pentair

Trapped air inside your sand filter can dramatically reduce filtration performance and put unnecessary stress on your pump. The Pentair Air Relief Bleeder Assembly (154687) provides a direct solution by safely venting accumulated air from your PacFab Triton II Sand Filter. Manufactured from heavy-duty materials built to resist corrosion and chemical exposure, this assembly delivers dependable, long-term service. By eliminating air pockets that disrupt water...

170028 Air Bleed Tube Assembly for Quad DE 80 & Clean & Clear Plus 420 Filter | Pentair

Get your filter running at its best with the Pentair Air Bleed Tube Assembly (170028), designed as a direct-fit replacement for Quad DE 80 and Clean & Clear Plus 420 Filters. When air becomes trapped inside the filter tank, pressure fluctuates and filtration quality drops. This precision-manufactured assembly provides a dependable venting channel that releases accumulated air, stabilizing system pressure and allowing the filter media...

170029 Air Bleed Tube Assembly for Quad DE 60 & Clean & Clear Plus 320 Filter | Pentair

Eliminate trapped air and bring your filter back to full strength with the Pentair Air Bleed Tube Assembly (170029), engineered specifically for Quad DE 60 and Clean & Clear Plus 320 Filters. Air accumulation inside the filter housing disrupts water circulation and degrades cleaning performance. This factory-spec assembly provides a controlled release valve for that air, maintaining steady pressure and protecting internal filter elements from...

1HP Replacement Impeller for Pentair SuperMax & SuperFlo Pumps | CMP 355067 | SW-21-302 | 25305-067-000

Refresh your pool pump's performance with the CMP Impeller 25305-067-000, a quality replacement part sized for 1 horsepower systems. This impeller is designed to pair with Pentair SuperFlo and Sta-Rite SuperMax pumps, providing the water-moving force needed to keep your pool clean and properly filtered. For a seamless swap, always reference your pump's documentation or consult with a pool service professional to verify compatibility with...

1HP Replacement Impeller for Pentair WhisperFlo Pumps | PC&G 073128 PCG073128

This premium aftermarket impeller from PC&G is purpose-built to serve as a direct substitute for the factory 1 HP impeller in Pentair Whisperflo Pumps. Fitting an extensive lineup of WhisperFlo pool pump models, this impeller sustains efficient hydraulic output and forms part of a pump platform celebrated for its low-noise profile and energy-conscious operation. Key Benefits Engineered Hydraulic Geometry: Delivers strong water flow while keeping...

2.5" Hi-Temp Union for WhisperFlo & IntelliFlo Pumps by CMP | 1 Pack | 21063-250-000

Keep your Pentair pump plumbing secure and leak-free with the CMP Hi-Temp Union, a 2.5-inch coupling specifically dimensioned for Whisperflo and Intelliflo pump systems. Engineered to endure the sustained high temperatures generated by heated pool circulation, this union maintains a rock-solid connection that will not loosen or degrade over time. The straightforward design allows for quick installation without specialized plumbing tools, and the precision-molded construction...

2.5" Hi-Temp Union for WhisperFlo & IntelliFlo Pumps by CMP | 2 Pack | 21063-250-000

Handle both the suction and discharge sides of your Pentair pump in one purchase with this convenient 2-pack of CMP Hi-Temp Unions. Each 2.5-inch coupling is purpose-designed for Whisperflo and Intelliflo pump systems, delivering the thermal resilience needed for heated pool circulation lines. The unions lock down tight to prevent leaks even under prolonged high-temperature operation, and their user-friendly design means installation is quick whether...

2HP - 2.5HP Replacement Impeller for Pentair WhisperFlo Pumps | CMP 073130 | 25305-130-000

Elevate the output of your Pentair WhisperFlo pump with the CMP Impeller 25305-130-000, a performance-focused replacement engineered for 2HP to 2.5HP models. This part is a direct substitute for the Pentair OEM part number 073130 and fits seamlessly into WhisperFlo, WhisperFlo VS, and WhisperFlo VST pump platforms. Its advanced blade profile drives strong, efficient water circulation that keeps your filtration system performing at its highest...

2HP - 2.5HP Replacement Impeller for Pentair WhisperFlo Pumps | PC&G 073130 PCG073130

The PC&G Impeller PCG073130 is a performance-grade replacement engineered for Pentair WhisperFlo Pumps rated at 2HP to 2.5HP. Serving as a direct substitute for the original Pentair OEM part number 073130, this impeller fits a broad selection of WhisperFlo and WhisperFlo VS / VST units. Its precision-balanced vane geometry maximizes water velocity through the volute, supporting strong circulation rates that keep your pool sparkling clean...

2HP Replacement Impeller for Pentair SuperMax & SuperFlo Pumps | CMP 355086 | SW-21-304 | 25305-086-000

Give your 2 horsepower pool pump the flow boost it needs with the CMP Impeller 25305-086-000. Tailored for Pentair SuperFlo and Sta-Rite SuperMax pump platforms, this replacement impeller restores full water-moving capability so your pool stays clean and properly circulated. To ensure a trouble-free installation, it is always a good practice to check your pump's owner manual or have a licensed pool technician confirm that...

2HP Wet End Volute Pot Kit for Pentair WhisperFlo Pumps | PC&G 357149 PCG075455

Restore your 2HP Pentair WhisperFlo pump to factory-fresh condition with the PC&G Wet End Volute Pot Kit PCG075455. This all-in-one rebuild package supplies every wet-end component you need, from the volute housing and diffuser to the strainer basket, seal plate, O-rings, and locking rings, all manufactured to exacting tolerances from premium-grade materials. Rather than sourcing individual parts, this kit delivers a complete overhaul solution that...

355612 Pentair Sta-Rite SuperMax Pump Black Seal Plate Replacement

Restore a watertight pump housing with the genuine Pentair Black Seal Plate Replacement 355612, factory-matched for Sta-Rite Supermax and SuperFlo pool pumps produced before 6/17/19. This molded seal plate sits between the pump housing and motor mount, creating an airtight barrier that eliminates suction leaks and keeps priming consistent. Precision-formed from a resilient, chemically stable material, it holds its dimensional accuracy over thousands of operating...

3HP Replacement Impeller for Pentair WhisperFlo & IntelliFlo Pumps | PC&G PCG073131

Restore peak hydraulic output with the PC&G 3HP Impeller, model PCG073131, precision-engineered to fit Pentair Whisperflo and Intelliflo pump platforms. This performance-grade impeller drives water through the pump volute with maximum efficiency, boosting circulation rates and promoting superior water turnover throughout your pool. Built from resilient, corrosion-resistant materials, it is designed to endure the chemical and mechanical stresses of continuous pool pump operation. Swap in...

42001-0061S Air Flow Switch for MasterTemp & Max-E-Therm Pool Heaters | Pentair

The genuine OEM Pentair Air Flow Switch (42001-0061S) is the safety sensor that confirms adequate combustion air is reaching the burner before allowing ignition. It monitors the pressure differential across the air metering orifice; once airflow reaches the required threshold, the switch closes the circuit to the hot surface igniter (HSI), which lights the gas-air mixture. During a typical heating call, the blower and HSI...

42002-0025S Pentair 140° Automatic Gas Shut-Off Switch - MasterTemp & Max-E-Therm Heaters

Protect your pool or spa heater investment with this genuine Pentair Automatic Gas Shutoff Switch. Engineered as a critical safety device, this switch continuously monitors operating temperature and immediately cuts the gas supply whenever the system reaches 140 degrees Fahrenheit. This rapid response prevents overheating scenarios that could lead to equipment failure or dangerous conditions. The switch is built as a direct drop-in for Pentair...

460743 Air Blower Kit for MasterTemp 250 Natural Gas Pool Heater | Pentair

Get your Pentair MasterTemp 250 heater firing on all cylinders with this genuine Air Blower Kit (460743). The blower delivers precisely metered airflow to the combustion chamber, enabling clean fuel ignition and rapid heat transfer to your pool water. Packaged with all necessary mounting hardware and connectors, this kit streamlines the replacement process so you can restore full heating output without lengthy downtime or guesswork....